How to reflash N900 with Ubuntu

From lechacal
Revision as of 13:05, 13 November 2017 by Administrator (talk | contribs) (→‎Steps)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Overview

This is brief how to to show how the N900 can be reflashed using Ubuntu. Tested with Ubuntu Xenial 16.04.2.
NOTICE: All data from the Nokia N900 will be erased.

Steps

Get the flasher:
http://www.fladnag.net/downloads/telephone/n900/tools/maemo_flasher-3.5_2.5.2.2.tar.gz

Get the firmware:
http://www.fladnag.net/downloads/telephone/n900/RX-51_2009SE_20.2010.36-2.203.1_PR_COMBINED_203_ARM.bin

Get the EMMC:
http://www.fladnag.net/downloads/telephone/n900/RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin

Deflate the flasher and save both firmware and EMMC inside the flasher folder.

Turn the phone off.

Hold down the u button on the keyboard of the phone and while holding it plug in the USB cable. (A very DIM Nokia screen with a little USB symbol in the top right corner will appear).

From inside the flasher folder issue this command below: 

sudo ./flasher-3.5 -F RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin -f -R

Wait until the phone reboots. Then force shutdown straight away. Do the u button start up again.

Then issue the command below: 

sudo ./flasher-3.5 -F RX-51_2009SE_20.2010.36-2.203.1_PR_COMBINED_203_ARM.bin -f -R

When the phone reboots you are all done now.

Retrieved from ‘http://lechacal.com//wiki/index.php?title=How_to_reflash_N900_with_Ubuntu&oldid=2081’