View source for Before 1st July 22 RPICT8 Configuration

=Software Configuration=

Using a serial line terminal program one can configure the following:
 - Polling interval
 - Output format (csv or emoncms)
 - Calibration values (Voltage and Current)
 - Voltage/current combinations for real power computation.
 - Output channels

The documentation for serial configuration can be found on this page. <br>

[[Over Serial Configuration - Sketch 3.0]]<br>

[[File:Online_config_01.png | 300px| link=http://lechacal.com/RPICT/config/generator/v3.1/]] The board can be configured with the [http://lechacal.com/RPICT/config/generator/v3.1/ online configurator].



===Auto Reset===

Version 5 units have auto reset support. When using the lcl-rpict-config.py command it is possible to reset the RPICT remotely with the -a option.
 lcl-rpict-config.py -a 
or 
 lcl-rpict-config.py -a -w myfile.conf