|
|
| (46 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
|
| |
|
|
| |
|
| This howto will cover the steps to setup a Rasperrypi for reading CSV stream from RPICT series board. | | This page has been renamed. |
|
| |
|
| =Hardware and OS=
| | See [[Howto_setup_Raspbian_for_serial_read]] |
| This has been tested using Raspberrypi 3 Model B
| |
| | |
| Used OS: Raspbian Jessie 2017-01-11-raspbian-jessie.img
| |
| | |
| =Steps=
| |
| | |
| ==-1-==
| |
| | |
| Download the image from the raspberrypi website.
| |
| https://www.raspberrypi.org/downloads/raspbian/
| |
| | |
| ==-2-==
| |
| | |
| Write the image to the SD card. Follow instructions given by the raspberrypi website.
| |
| | |
| https://www.raspberrypi.org/documentation/installation/installing-images/
| |
| | |
| ==-3-==
| |
| | |
| Once the image written create an empty file called 'ssh' in the boot section of the image.
| |
| | |
| ==-4-==
| |
| | |
| Power up the raspberrypi and connect it to the network. Access the raspberrypi with the ssh command (or whatever tool your OS have). We obviously assume you are using Linux based OS below.
| |
| $ ssh pi@raspberrypi
| |
| | |
| Use password raspberry
| |
| | |
| ==-5-==
| |
| Run the raspi-config
| |
| $ sudo raspi-config
| |
| In the menu expand the Filesystem (optional).
| |
| 1 Expand Filesystem
| |
| | |
| Disable the login uart
| |
| 7 Advanced Options
| |
| then go to
| |
| A8 Serial
| |
| Say no to login shell question
| |
Latest revision as of 18:59, 12 July 2018