Tiny Stepper Controller: Difference between revisions

From lechacal
Jump to navigation Jump to search
(Created page with "'''COMING SOON'''")
 
No edit summary
Line 1: Line 1:
'''COMING SOON'''
<div class="rounded_STYLE rounded"><div class="header"><br />
 
<center><font size="5"><font color="white">''' Arduino Stepper Control Board <br /> with manual control '''</font></font></center>
 
<br /><br /></div><br /><br />
 
<font size="5">'''Arduino Stepper Control Board'''</font>
 
Stepper Motor driver board with an Attiny85.<br /> Can be programmed with Arduino IDE.<br /> It uses the A4988 controller.<br /><br /> Manual Control ready with:<br />
 
<div align="CENTER">
 
* Potentiometer for speed.
* Push button for single step increment.
* Slider switch for direction selection.
 
</div><br />
 
Direction and Step can either be controlled from Attiny85 mcu or from switches.<br /> 35V max power supply. Uses 2.1mm DC power socket connector.<br /> DIL switch for selection of step resolution.<br /> Two digital I/O available for external use (serial port/external sensors/ external switch).<br /> Sold flashed with a basic sketch to run the motor at various speeds. [http://lechacal.com/stepper_control/steppercontrol.ino Sketch here.]<br /> More complete documentation and videos to come soon. Any questions don't hesitate to ask.
 
<div align="CENTER"><br /><br />[[Image:detailed.png]]<br />  <br /><br />[[Image:IMG_0129.JPG]]<br /><br />[[Image:IMG_0131.JPG]]<br /><br />[[Image:IMG_0132.JPG]]<br /><br />[[Image:IMG_0133.JPG]]<br /><br />[[Image:IMG_0134.JPG]]<br /><br />[[Image:IMG_0135.JPG]]<br /><br />[[Image:IMG_0136.JPG]]</div><br /><br /></div>
 
<br />

Revision as of 15:48, 3 May 2014


Arduino Stepper Control Board
with manual control




Arduino Stepper Control Board

Stepper Motor driver board with an Attiny85.
Can be programmed with Arduino IDE.
It uses the A4988 controller.

Manual Control ready with:

  • Potentiometer for speed.
  • Push button for single step increment.
  • Slider switch for direction selection.

Direction and Step can either be controlled from Attiny85 mcu or from switches.
35V max power supply. Uses 2.1mm DC power socket connector.
DIL switch for selection of step resolution.
Two digital I/O available for external use (serial port/external sensors/ external switch).
Sold flashed with a basic sketch to run the motor at various speeds. Sketch here.
More complete documentation and videos to come soon. Any questions don't hesitate to ask.




Retrieved from ‘http://lechacal.com//wiki/index.php?title=Tiny_Stepper_Controller&oldid=86’