RPICT Development Datasheet: Difference between revisions
Jump to navigation
Jump to search
(→ADC) |
(→ADC) |
||
| Line 36: | Line 36: | ||
|- | |- | ||
|Slave 1 | |Slave 1 | ||
| | |PD6 | ||
|6 | |6 | ||
|- | |- | ||
|Slave 2 | |Slave 2 | ||
| | |PD7 | ||
|7 | |7 | ||
|- | |- | ||
|Slave 3 | |Slave 3 | ||
| | |PB0 | ||
|8 | |8 | ||
|- | |- | ||
|Slave 4 | |Slave 4 | ||
| | |PB1 | ||
|9 | |9 | ||
|- | |- | ||
|} | |} | ||
Revision as of 12:03, 6 November 2019
RPICT with MCP3208
Applies to :
- RPICT7V1 Version 2
- RPICT7V1 Version 3
- RPICT8 Version 3.0
- RPICT8 Version 1.3
- RPICT4V3 Version 2
- RPICT4V3 Version 3
- RPI_LCT4V3
- RPI_LCT8
Generalities
Microcontroller: Atmega328p
ADC: MCP3208
ADC
ADC is accessed using standard SPI port on Atmega328p using pins MISO MOSI SCK.
Chip select differs according to board type slave or master.
| Board Type | Atmel Pin | Arduino Pin |
|---|---|---|
| Master | PB2 | 10 |
| Slave 1 | PD6 | 6 |
| Slave 2 | PD7 | 7 |
| Slave 3 | PB0 | 8 |
| Slave 4 | PB1 | 9 |