RPICT Fundamentals: Difference between revisions
Jump to navigation
Jump to search
(Created page with " File:Block_diagram_p1.png") |
No edit summary |
||
| Line 1: | Line 1: | ||
We will cover some of the basic fundamentals used by the RPICT series below. | |||
==Signal Flow== | |||
[[File:Block_diagram_p1.png]] | [[File:Block_diagram_p1.png]] | ||
Each signal whether if it's a current or voltage line is first conditioned to obtain the desired range. We perform this either by simply adjusting the burden resistor or by fitting voltage divider or amplifier. | |||
This is an important step to condition the sensor range to the ADC range. Sensors may output anything but the ADC requires an input between 0 and Vref. | |||
Revision as of 22:10, 15 January 2021
We will cover some of the basic fundamentals used by the RPICT series below.
Signal Flow
Each signal whether if it's a current or voltage line is first conditioned to obtain the desired range. We perform this either by simply adjusting the burden resistor or by fitting voltage divider or amplifier. This is an important step to condition the sensor range to the ADC range. Sensors may output anything but the ADC requires an input between 0 and Vref.