ZMPT101B Module 1x v2: Difference between revisions
Jump to navigation
Jump to search
(Created page with " [http://lechacalshop.com/gb/internetofthing/75-zmpt101b-voltage-sensor.html Link to the shop]. ZMPT101B Module converts AC Voltage to lower AC Voltage suitable for connectio...") |
No edit summary |
||
| Line 6: | Line 6: | ||
This module shows greatly improved linearity features. | This module shows greatly improved linearity features. | ||
[[File: | [[File:IMG_0662_small.png| 300px | right]] | ||
===Compatible boards=== | ===Compatible boards=== | ||
Revision as of 10:50, 19 April 2021
ZMPT101B Module converts AC Voltage to lower AC Voltage suitable for connection with our RPICT units.
This module shows greatly improved linearity features.
Compatible boards
We are slowly converting all our RPICT units for zmpt101b compatibility.
For now only these boards listed below have zmpt101b support
Connections
- Input AC has terminal connector
- Output AC has Jack power type for direct connection to RPICT with a Power Jack cable.
Mechanical
- Dimensions: 45x30mm height 23mm.
- 2 Holes 25mm apart for Din Rail mounting.
Technical Spec
| Name | Input Resistor | Output Resistor (Ω) | Sensitivity | Range (rms) | Comment |
|---|---|---|---|---|---|
| ZMPT_1X_225 | 160 kΩ | 100 Ω | 0.625 mV/V | 225V | Used to cover both 110 and 220V. |
| ZMPT_1X_140 | 100 kΩ | 100 Ω | 1 mV/V | 140V | For 110/120V use. |
| ZMPT_1X_280 | 200 kΩ | 100 Ω | 0.5 mV/V | 280V | For 220/240V use. |