Repeat a Wifi Hotspot: Difference between revisions

Revision as of 16:15, 8 May 2015

In this setup we will show how we can connect to a wifi hotspot and redistribute the signal so that several computers/phone can connect.

Documentation written for OpenWRT Barrier Breaker 14.07 from fresh install.

From the menu go to Network | Wifi.

Then Hit The Scan button to find your hotspot network.

Select your network with the Join Network button.

Leave everything as default then hit Submit

Hit Save & Apply on the next page.

You should now land on this page.

Return to Network | Wifi. Then hit the Add button to had the Access point interface.

Revision as of 16:15, 8 May 2015 (view source) Administrator (talk \| contribs) (→‎Configuration from Web Interface (Luci)) ← Older edit		Revision as of 16:15, 8 May 2015 (view source) Administrator (talk \| contribs) (→‎Configuration from Web Interface (Luci)) Newer edit →
Line 76:		Line 76:

	You should now land on this page.		You should now land on this page.