RPICT configuration web tool: Difference between revisions
Jump to navigation
Jump to search
| Line 15: | Line 15: | ||
This page will produce configuration that assumes | This page will produce configuration that assumes | ||
* All RPICT unit with voltage port do use a voltage sensor. | * All RPICT unit with a voltage port do use a voltage sensor. | ||
* All slave units are rated the same as a master unit (e.g. all are 100A). | * All slave units are rated the same as a master unit (e.g. all are 100A). | ||
==Full Configuration page== | ==Full Configuration page== | ||
Revision as of 18:02, 6 August 2022
The web tool aim to make the configuration of the RPICT units easier.
There are two pages in this tool.
- Basic Configuration
- Full Configuration
Basic Configuration page
Use the basic configuration for very standard usage of the RPICT unit. i.e. using the RPICT board with their intended sensors.
This page will produce configuration that assumes
- All RPICT unit with a voltage port do use a voltage sensor.
- All slave units are rated the same as a master unit (e.g. all are 100A).