ACS715 Sensor: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 2: | Line 2: | ||
*Hall Effect current sensor | *Hall Effect current sensor | ||
*Measuring range: 0 to +20A | *Measuring range: 0 to +20A | ||
*Sensitivity: 185mV/A | |||
*32A rated Screw terminal connector | *32A rated Screw terminal connector | ||
*Screw terminal connector to Gnd,5V,Out | *Screw terminal connector to Gnd,5V,Out | ||
Revision as of 10:17, 24 July 2016
- Hall Effect current sensor
- Measuring range: 0 to +20A
- Sensitivity: 185mV/A
- 32A rated Screw terminal connector
- Screw terminal connector to Gnd,5V,Out
- Dimensions 26x28mm
Connect with Arduino
The sensor can be interfaced with Arduino board by using the 3 way screwterminal connector.
Connections are as follow:
| Gnd | +5V | Analog Out |
Connect Analog Out to one Analog in pin on the arduino.
Example sketch to follow soon...