FTDI Programmer: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 13: | Line 13: | ||
If the sketch is inadvertently overwritten (green led not flashing anymore) one can reload the sketch to fix it. | If the sketch is inadvertently overwritten (green led not flashing anymore) one can reload the sketch to fix it. | ||
==Related Article== | |||
[[How_to_program_an_Attiny85_or_Attiny84 How to program an Attiny85 or Attiny84]] | |||
Revision as of 16:11, 11 December 2014
This is a programmer board for use with a FTDI adaptor. To connect the board to a computer you will need a FTDI/USB adaptor.
Technical Specifications
Currently known chips able to program:
Attiny85 Attiny45 Attiny13
Attiny84
Atmega328 Atmega168 Atmega8
Firmware
The firmware used by the programmer is the sketch provided by the Arduino Example sketch ArduinoISP. See File | Examples |ArduinoISP.
If the sketch is inadvertently overwritten (green led not flashing anymore) one can reload the sketch to fix it.
Related Article
How_to_program_an_Attiny85_or_Attiny84 How to program an Attiny85 or Attiny84