RPICT Development Datasheet: Difference between revisions
Jump to navigation
Jump to search
(→ADC) |
|||
| Line 53: | Line 53: | ||
|- | |- | ||
|} | |} | ||
==Serial Port== | |||
Standard UART is used on Atmega328. | |||
* PD0 (Arduino Pin 0) is RXD. | |||
* PD1 (Arduino Pin 1) is TXD. | |||
Revision as of 12:06, 6 November 2019
RPICT with MCP3208
Applies to :
- RPICT7V1 Version 2
- RPICT7V1 Version 3
- RPICT8 Version 3.0
- RPICT8 Version 1.3
- RPICT4V3 Version 2
- RPICT4V3 Version 3
- RPI_LCT4V3
- RPI_LCT8
Generalities
Microcontroller: Atmega328p
ADC: MCP3208
ADC
ADC is accessed using standard SPI port on Atmega328p using pins MISO MOSI SCK.
Chip select differs according to board type slave or master.
| Board Type | Atmel Pin | Arduino Pin |
|---|---|---|
| Master | PB2 | 10 |
| Slave 1 | PD6 | 6 |
| Slave 2 | PD7 | 7 |
| Slave 3 | PB0 | 8 |
| Slave 4 | PB1 | 9 |
Serial Port
Standard UART is used on Atmega328.
- PD0 (Arduino Pin 0) is RXD.
- PD1 (Arduino Pin 1) is TXD.