Gen4 Passive Component Setup: Difference between revisions
Jump to navigation
Jump to search
| Line 112: | Line 112: | ||
=Vref = 3.3V= | =Vref = 3.3V= | ||
{| class="wikitable" | |||
|+ | |||
|- | |||
!Sensor | |||
!Range<br> (Rms Volts) | |||
!Burden Resistor<br> Rb (Ω) | |||
!Dividing Resistor<br> (Ω) | |||
!Gain Resistor<br> Rg (Ω) | |||
!Calibration Coefficient<br> (theoretical) | |||
|- | |||
| '''Any Ideal Power''' | |||
| | |||
| | |||
| | |||
| | |||
| | |||
|- | |||
| '''ZMPT101B <br> 160kΩ in 100Ω out''' | |||
| 250V | |||
| No | |||
| 0 Ω | |||
| 22K | |||
| 284.37 (exp) | |||
|- | |||
|} | |||
Revision as of 14:29, 10 February 2020
Vref = 4.096V
AC Current Transformers
| Sensor | Range (Rms Amps) |
Burden Resistor Rb (Ω) |
Dividing Resistor (Ω) |
Gain Resistor Rg (Ω) |
Calibration Coefficient (theoretical) |
|---|---|---|---|---|---|
| SCT-019-000 | 200 | 10 | 0 | ||
| SCT-013-000 | 100 | 10 | 0 | 53.6 kΩ | 69.8 |
| 60 | 10 | 0 | |||
| 50 | 10 | 0 | |||
| 30 | 10 | 0 | |||
| 25 | 10 | 0 | |||
| 20 | 10 | 0 | |||
| SCT-006-000 | 20 | 10 | 0 | 22k | 14.43 |
| SCT-024 400:5 | 400 | 0.24 | 0 | No | 80 |
| SCT-013-030 | 30 | 62 (internal) | 0 | 200k | 20 |
AC Voltage
Ideal Power
| Sensor | Range (Rms Volts) |
Burden Resistor Rb (Ω) |
Dividing Resistor (Ω) |
Gain Resistor Rg (Ω) |
Calibration Coefficient (theoretical) |
|---|---|---|---|---|---|
| Any Ideal Power | 33 kΩ | 470 kΩ | No | 322.5 (experimental) | |
| ZMPT101B 160kΩ in 100Ω out |
No | 0 Ω |
Vref = 3.3V
| Sensor | Range (Rms Volts) |
Burden Resistor Rb (Ω) |
Dividing Resistor (Ω) |
Gain Resistor Rg (Ω) |
Calibration Coefficient (theoretical) |
|---|---|---|---|---|---|
| Any Ideal Power | |||||
| ZMPT101B 160kΩ in 100Ω out |
250V | No | 0 Ω | 22K | 284.37 (exp) |