FTDI Programmer: Difference between revisions

Revision as of 16:30, 27 April 2015

This is a programmer board for use with a FTDI adaptor. This board connects to a computer a FTDI/USB adaptor.

Currently known supported Micro Controller Units:
Attiny85
Attiny45
Attiny13
Attiny84
Atmega328
Atmega168
Atmega8

Operate on 5Volts.

The firmware used by the programmer is the sketch provided by the Arduino Example sketch ArduinoISP. See File | Examples | ArduinoISP.

Revision as of 16:15, 11 December 2014 (view source) Administrator (talk \| contribs) (→‎Technical Specifications) ← Older edit		Revision as of 16:30, 27 April 2015 (view source) Administrator (talk \| contribs) No edit summary Newer edit →
Line 1:		Line 1:
	This is a programmer board for use with a FTDI adaptor. ~~To connect the~~ board to a computer ~~you will need~~ a FTDI/USB adaptor.		This is a programmer board for use with a FTDI adaptor. This board connects to a computer a FTDI/USB adaptor.

	[[Image:IMG_0300_small.jpg]]		[[Image:IMG_0300_small.jpg]]