Gen5 Passive Component Setup: Difference between revisions
Jump to navigation
Jump to search
| Line 26: | Line 26: | ||
| rowspan=6 | '''SCT-013-000''' | | rowspan=6 | '''SCT-013-000''' | ||
| 100 | | 100 | ||
| 0 | | 0 | ||
| None | | None | ||
| 22k | | 22k | ||
| 4k7 | | 4k7 | ||
| | |||
| | | | ||
|- | |- | ||
Revision as of 18:41, 17 September 2020
Vref = 4.096V
CT Current Transformers
| Sensor | Range (Rms Amps) |
Burden Resistor RD1 (Ω) |
Dividing Resistor RD2(Ω) |
Gain Resistor RF (Ω) |
Gain Resistor RG (Ω) |
Calibration Coefficient (theoretical) | |
|---|---|---|---|---|---|---|---|
| SCT-019-000 | |||||||
| SCT-013-000 | 100 | 0 | None | 22k | 4k7 | ||
| 60 | 10 | 0 | |||||
| 50 | 10 | 0 | |||||
| 30 | 10 | 0 | |||||
| 25 | 10 | 0 | |||||
| 20 | 10 | 0 | |||||
| SCT-006-000 | 20 | 10 | 0 | ||||
| SCT-024 400:5 | 400 | No | 80 |
AC Voltage
| Sensor | Range (Rms Volts) |
Burden Resistor Rb (Ω) |
Dividing Resistor (Ω) |
Gain Resistor Rg (Ω) |
Calibration Coefficient (theoretical) |
|---|---|---|---|---|---|
| Any Ideal Power | 33 kΩ | 470 kΩ | No | 322.5 (experimental) | |
| ZMPT101B 160kΩ in 100Ω out Sensitivity 0.625mv/V |
430V | No | 0 Ω | 22kΩ | 356.7 |
Vref = 3.3V
| Sensor | Range (Rms Volts) |
Burden Resistor Rb (Ω) |
Dividing Resistor (Ω) |
Gain Resistor Rg (Ω) |
Calibration Coefficient (theoretical) |
|---|---|---|---|---|---|
| Any Ideal Power | |||||
| ZMPT101B 160kΩ in 100Ω out sensitity 0.625mV/V |
280V | No | 0 Ω | 22K | 284.37 (exp) |