Gen5 Passive Component Setup: Difference between revisions
Jump to navigation
Jump to search
| Line 80: | Line 80: | ||
| '''ZMPT_1X_225 <br> 160kΩ in 100Ω out''' | | '''ZMPT_1X_225 <br> 160kΩ in 100Ω out''' | ||
| 400V | | 400V | ||
| 0. | | 0.25V | ||
| 0Ω | | 0Ω | ||
| ∞ | | ∞ | ||
| Line 86: | Line 86: | ||
| 4.7kΩ | | 4.7kΩ | ||
| 281.65 | | 281.65 | ||
|- | |||
| '''ZMPT_1X_280 <br> 200kΩ in 100Ω out''' | |||
| 290V | |||
| 0.15V | |||
| 0Ω | |||
| ∞ | |||
| 42.2kΩ | |||
| 4.7kΩ | |||
| 200.43 | |||
|- | |- | ||
|} | |} | ||
Revision as of 13:47, 28 October 2020
Vref = 4.096V
CT Current Transformers
| Sensor | Range (Rms Amps) |
Burden Resistor RD1 (Ω) |
Calibration Coefficient (theoretical) |
|---|---|---|---|
| SCT-019-000 | 200 | 43 | 139.535 |
| SCT-013-000 | 100 | 27 | 74.074 |
| 60 | 47 | 42.553 | |
| 50 | 56 | 35.714 | |
| 30 | 91 | 21.978 | |
| 25 | 110 | 18.182 | |
| 20 | 140 | 14.286 | |
| SCT-006-000 | 20 | 56 | 14.286 |
| SCT-024 400:5 | 400 |
AC Voltage
| Sensor | Range @ sensor input |
Range @ board input |
RD1 (Ω) | RD2(Ω) | Gain Resistor RF (Ω) |
Gain Resistor RG (Ω) |
Calibration Coefficient (theoretical) |
|---|---|---|---|---|---|---|---|
| Any ac/ac adaptor up to 18V output |
(EU) 77DE-06-09: 360V (UK) 77DB-06-09: 372V (US) 77DA-10-09: 180V |
18V | 53.6kΩ | 4.7kΩ | 0 | ∞ | (EU) 77DE-06-09: 248.1 (UK) 77DB-06-09: 256.6 (US) 77DA-10-09: 124.0 |
| ZMPT_1X_225 160kΩ in 100Ω out |
400V | 0.25V | 0Ω | ∞ | 22kΩ | 4.7kΩ | 281.65 |
| ZMPT_1X_280 200kΩ in 100Ω out |
290V | 0.15V | 0Ω | ∞ | 42.2kΩ | 4.7kΩ | 200.43 |