Gen5 Passive Component Setup: Difference between revisions
Jump to navigation
Jump to search
| Line 108: | Line 108: | ||
|- | |- | ||
|} | |} | ||
ZMPT_1X_225 is no longer used. Listed here for reference. | |||
=Vref = 3.3V= | =Vref = 3.3V= | ||
Revision as of 15:18, 3 November 2020
Vref = 4.096V
CT Current Transformers
| Sensor | Range (Rms Amps) |
Burden Resistor RD1 (Ω) |
Calibration Coefficient (theoretical) |
|---|---|---|---|
| SCT-019-000 | 200 | 43 | 139.535 |
| SCT-013-000 | 100 | 27 | 74.074 |
| 60 | 47 | 42.553 | |
| 50 | 56 | 35.714 | |
| 30 | 91 | 21.978 | |
| 25 | 110 | 18.182 | |
| 20 | 140 | 14.286 | |
| SCT-006-000 | 20 | 56 | 14.286 |
| SCT-024 400:5 | 400 |
AC Voltage
All voltage reported as RMS value in the table below.
| Sensor | Range @ sensor input |
Range @ board input |
RD1 (Ω) | RD2(Ω) | Gain Resistor RF (Ω) |
Gain Resistor RG (Ω) |
Calibration Coefficient (theoretical) |
|---|---|---|---|---|---|---|---|
| Any ac/ac adaptor up to 18V output |
(EU) 77DE-06-09: 360V (UK) 77DB-06-09: 372V (US) 77DA-10-09: 180V |
18V | 53.6kΩ | 4.7kΩ | 0 | ∞ | (EU) 77DE-06-09: 248.1 (UK) 77DB-06-09: 256.6 (US) 77DA-10-09: 124.0 |
| ZMPT_1X_225 | 408V | 0.25V | 0Ω | ∞ | 22kΩ | 4.7kΩ | 281.65 |
| ZMPT_1X_280 | 290V | 0.15V | 0Ω | ∞ | 42.2kΩ | 4.7kΩ | 200.43 |
| ZMPT_1X_140 | 145V | 0.15V | 0Ω | ∞ | 42.2kΩ | 4.7kΩ | 100.21 |
ZMPT_1X_225 is no longer used. Listed here for reference.
Vref = 3.3V
AC Voltage
All voltage reported as RMS value in the table below.
| Sensor | Range @ sensor input |
Range @ board input |
RD1 (Ω) | RD2(Ω) | Gain Resistor RF (Ω) |
Gain Resistor RG (Ω) |
Calibration Coefficient (theoretical) |
|---|---|---|---|---|---|---|---|
| Any ac/ac adaptor up to 18V output |
(EU) 77DE-06-09: V (UK) 77DB-06-09: V (US) 77DA-10-09: V |
V | kΩ | kΩ | 0 | ∞ | (EU) 77DE-06-09: (UK) 77DB-06-09: (US) 77DA-10-09: |
| ZMPT_1X_225 | 329V | 0.2V | 0Ω | ∞ | 22kΩ | 4.7kΩ | 281.65 |
| ZMPT_1X_280 | 291V | 0.145V | 0Ω | ∞ | 33kΩ | 4.7kΩ | 249.34 |
| ZMPT_1X_140 | 145V | 0.145V | 0Ω | ∞ | 33kΩ | 4.7kΩ | 124.67 |