ZMPT101B Module 3x v4: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 19: | Line 19: | ||
* Input AC has terminal connector | * Input AC has terminal connector | ||
[[File: | [[File:P1000448.JPG_small.png | 250px]] | ||
* Output AC has Jack power type for direct connection to RPICT with a Power Jack cable. | * Output AC has Jack power type for direct connection to RPICT with a Power Jack cable. | ||
[[File: | [[File: P1000446.JPG_small.png| 250px]] | ||
===Mechanical=== | ===Mechanical=== | ||
Revision as of 13:13, 9 October 2023
ZMPT101B Module converts AC Voltage to lower AC Voltage suitable for connection with our RPICT units.
This module shows greatly improved linearity features.
Compatible boards
The ZMPT_3X is specifically designed for 3 phase application.
Any RPICT unit with a voltage input can support ZMPT module provided the unit has been specifically purchased with ZMPT support. Make sur this is ordered right when placing the order in the shop.
Connections
- Input AC has terminal connector
- Output AC has Jack power type for direct connection to RPICT with a Power Jack cable.
Mechanical
- Dimensions: 45x30mm height 23mm.
- 2 Holes 25mm apart for Din Rail mounting.
Technical Spec
| Name | Input Resistor | Output Resistor (Ω) | Sensitivity | Range (rms) | Comment |
|---|---|---|---|---|---|
| ZMPT_1X_225 | 160 kΩ | 100 Ω | 0.625 mV/V | 0 to 225V | Used to cover both 110 and 220V. |
| ZMPT_1X_140 | 100 kΩ | 100 Ω | 1 mV/V | 0 to 140V | For 110/120V use. |
| ZMPT_1X_280 | 200 kΩ | 100 Ω | 0.5 mV/V | 0 to 280V | For 220/240V use. |
| ZMPT_1X_420 | 300 kΩ | 100 Ω | 0.25 mV/V | 0 to 420V |