RPICT7V1

• 7 AC current sensor
• 1 AC Voltage sensor.
• Compute real power.
• Fit on Raspberrypi 4 holes mounting pattern.
• Attiny84 Mcu

Recommended sensors

• AC Current sensor: SCT-013-000
• AC Voltage sensor:
  • UK: 77DB-06-09
  • EU: 77DE-06-09
  • US: 77DA-10-09

Files

Default Sketch V1.0.

Emoncms Config

 [[11]]
    nodename = RPICT7V1
    firmware = RPICT7V1_V1_0.ino
    hardware = RPICT7V1
    [[[rx]]]
        names = Realpower1,Vrms1,Irms1,Realpower2,Vrms2,Irms2,Realpower3,Vrms3,Irms3,Realpower4,Vrms4,Irms4,Realpower5,Vrms5,Irms5,Realpower6,Vrms6,Irms6,Realpower7,Vrms7,Irms7
        datacodes = h, h, h, h, h, h, h, h, h, h, h, h, h, h, h, h, h, h, h, h,h
        scales = 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
        units = W,V,mA,W,V,mA,W,V,mA,W,V,mA,W,V,mA,W,V,mA,W,V,mA

Sketch Upload

To upload the sketch the three jumper at the center of the board must be removed.

An avr programmer with 6pin ribbon cable is needed for programming.