ModWRT: Difference between revisions
| Line 41: | Line 41: | ||
[[File:Web_002.png]] | [[File:Web_002.png]] | ||
<br> | |||
'''Name:''' Server identification name. | '''Name:''' Server identification name.<br> | ||
'''Type:''' Type of target server. Can be one of Emoncms, Thingspeak or InitialState. | '''Type:''' Type of target server. Can be one of Emoncms, Thingspeak or InitialState.<br> | ||
'''Hostname:''' Hostname or IP address of the server. Can be local or on www. | '''Hostname:''' Hostname or IP address of the server. Can be local or on www.<br> | ||
'''Apikey:''' APikey for identification with target server. | '''Apikey:''' APikey for identification with target server.<br> | ||
Revision as of 14:16, 4 July 2016
Please note this product is coming soon.
The ModWRT is a Modbus RTU unit to interface with one or several RS485 RTU devices. The ModWRT will send a predefined set of registers to a server for data logging and display. The end server can be either Emoncms, Thingspeak, InitialState or a custom server.
All communication and dataflow can be configure using a web interface.
Technical Specifications
- RS485 port
- Ethernet port
- Integrated Wifi
- Micro-usb Power supply
- Operating system: OpenWRT 14.04
- Flash Memory: 64MB
- Dimensions: 90x60x30mm
- Enclosure: Aluminium case
- Optional Wifi antenna
Software
The ModWRT web interface is build within the OpenWRT web interface.
There are three main functional area which are:
1/ RTU's definitions
2/ Servers definitions
3/ Dataflow configuration (ie which data goes where).
1. RTU definition
All Modbus RTU devices can be configured on one single page using Slave ID and communication parameters (baud rate etc).
2. Servers definition
Internet of Thing (iot) servers can be configured on this page.
Name: Server identification name.
Type: Type of target server. Can be one of Emoncms, Thingspeak or InitialState.
Hostname: Hostname or IP address of the server. Can be local or on www.
Apikey: APikey for identification with target server.