Repeat a Wifi Hotspot
In this setup we will show how we can connect to a wifi hotspot and redistribute the signal so that several computers/phone can connect.
Hardware
Software
Documentation written for OpenWRT Barrier Breaker 14.07 from fresh install.
Configuration from Web Interface (Luci)
1. Network | Wifi
From the menu go to Network | Wifi.
Then Hit The Scan button to find your hotspot network.
Select your network with the Join Network button.
Leave everything as default then hit Submit
Hit Save & Apply on the next page.
Return to Network | Wifi. Then hit the Add button to had the Access point interface.
