Before 1st July 22 RPICT8 Configuration

From lechacal
Revision as of 20:26, 3 July 2022 by Administrator (talk | contribs) (Created page with "=Software Configuration= Using a serial line terminal program one can configure the following: - Polling interval - Output format (csv or emoncms) - Calibration values (Vo...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Software Configuration

Using a serial line terminal program one can configure the following: 

- Polling interval
- Output format (csv or emoncms)
- Calibration values (Voltage and Current)
- Voltage/current combinations for real power computation.
- Output channels

The documentation for serial configuration can be found on this page.

Over Serial Configuration - Sketch 3.0

The board can be configured with the online configurator.


Auto Reset

Version 5 units have auto reset support. When using the lcl-rpict-config.py command it is possible to reset the RPICT remotely with the -a option. 

lcl-rpict-config.py -a

or 

lcl-rpict-config.py -a -w myfile.conf
Retrieved from ‘http://lechacal.com//wiki/index.php?title=Before_1st_July_22_RPICT8_Configuration&oldid=6534’