NanoFlashProg

Overview

link to the shop

The NanoFlashProg is an Flash programmer using Arduino Nano.

Currently supported chips are:

• Winbond 25Q128FV

This has been particularly designed to flash uboot bootloader on SPI Flash chips.

Hardware

The NanoFlashProg shield fit on an Arduino Nano. The full kit has:

• Mini USB port for serial comm.
• 8 pin connector for connection with socket programmer.

Usage

A terminal emulator is required to communicate with the programmer. We recommend Cutecom. HyperTerminal or similar will also work as long as the emulator is able to send a file.

Connect to the programmer using settings 115200 8N1.

On connection the programmer will introduce itself and offer a prompt.

NanoFlashProg v1.0.0
Type h for help
> 

Pressing h and enter will show the help.

R - Read page
D - Dump page
W - Write File
I - Chip Info
E - Chip Erase
H - Help
>