Flash RPICT Attiny84 with Arduino UNO

From lechacal
Revision as of 19:19, 23 February 2019 by Administrator (talk | contribs)
Jump to navigation Jump to search

This will guide through the steps to flash the firmware on the attiny84 microcontroller found on some RPICT series.

Required equipment

  • 1 Arduino UNO
  • 6 Jumper wires

Connections

Connect the wires between the Arduino UNO and the RPICT board as follow:

Arduino RPICT 10 Rst Gnd Gnd 11 MOSI 12 MISO 13 SCK 5V Vcc

Retrieved from ‘http://lechacal.com//wiki/index.php?title=Flash_RPICT_Attiny84_with_Arduino_UNO&oldid=3479’