Flash RPICT Attiny84 with Arduino UNO

From lechacal

Revision as of 19:19, 23 February 2019 by Administrator (talk | contribs) (→‎Connections)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

This will guide through the steps to flash the firmware on the attiny84 microcontroller found on some RPICT series.

Required equipment

1 Arduino UNO
6 Jumper wires

Connections

Connect the wires between the Arduino UNO and the RPICT board as follow:

Arduino RPICT
10 Rst
Gnd Gnd
11 MOSI
12 MISO
13 SCK
5V Vcc

Retrieved from ‘http://lechacal.com//wiki/index.php?title=Flash_RPICT_Attiny84_with_Arduino_UNO&oldid=3480’