Flash RPICT Attiny84 with Arduino UNO

From lechacal

Revision as of 19:22, 23 February 2019 by Administrator (talk | contribs) (→‎Connections)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

This will guide through the steps to flash the firmware on the attiny84 microcontroller found on some RPICT series.

Required equipment

1 Arduino UNO
6 Jumper wires

Connections

Connect the wires between the Arduino UNO and the RPICT board as follow:

Arduino RPICT
10 Rst
Gnd Gnd
11 MOSI
12 MISO
13 SCK
5V Vcc


Arduino	RPICT
10	Rst
Gnd	Gnd
13	SCK
11	MOSI
12	MISO
5V	VCC

Retrieved from ‘http://lechacal.com//wiki/index.php?title=Flash_RPICT_Attiny84_with_Arduino_UNO&oldid=3482’