RPI LCT4V3 stack with RPI LCT8 application example

We will showcase an application example of stacking together a RPI_LCT4V3 with a RPI_LCT8.

Mechanical considerations

The use of screw terminal connectors on RPI_LCT4V3 and RPI_LCT8 makes stacking challenging.

We are proposing here a solution using free plug connectors on the master board. These allow access to the bottom board connector and clearance to access the top board.

This is a solution for 2 boards stack. One master plus one slave. There is no options for stacking 3 boards or more at the moment.

Master RPI_LCT4V3

The master board RPI_LCT4V3 with the free plug connector is shown below:

Slave RPI_CT8

The salve board RPI_CT8 with standard screw terminal is shown below.

File:Example.jpg

Configuration

[main]
format = 3
nodeid = 11
polling = 5000
vest = 240.0
xpFREQ = 50
Ncycle = 20
kcal = 83.33 83.33 83.33 83.33 83.33 83.33 83.33 83.33 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 545.0 545.0 545.0 1 83.33 83.33 83.33 83.33 
phasecal = 0
Nnode = 12
Nchan = 15
HWSCT = 7 7 3 6 6 2 5 5 1 4 4 0 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
HWMCPSCT = 10 6 6 10 6 6 10 6 6 10 6 6 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
HWVOL = 2 1 0 2 1 0 2 1 0 2 1 0 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
HWMCPVOL = 10 10 10 10 10 10 10 10 10 10 10 10 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
CHTYPE = 1 1 1 1 1 1 1 1 1 1 1 1 3 3 3 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
CHID = 0 1 2 3 4 5 6 7 8 9 10 11 0 1 2 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
debug = 0