Configuration for 3Phase firmware

From lechacal

Revision as of 05:48, 5 July 2021 by Administrator (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

The configuration for the 3 Phase firmware inherit mostly from the individual channel firmware below.
Over Serial Configuration - Sketch 3.0

This applies for firmware RPICT4V3_3Phase_V5_v1.2.

Retrieved from ‘http://lechacal.com//wiki/index.php?title=Configuration_for_3Phase_firmware&oldid=5762’