Stepper UNO v2.0

StepperUNO - Stepper Motor Manual Control

The StepperUNO is a stepper motor manual control board for standalone system.

It can control up to two stepper motors and read sensors at the same time. It is suitable for small application requiring manual control and automation.

Based on the pattern of the Arduino UNO it is designed to host a LCD keypad shield. This combination makes the stepperUNO an excellent board for application control.

This is programmed using Arduino IDE. Sketch can be uploaded directly from USB port.

Specifications

• 2 Motor control output (Generic or embedded A4988 drivers)
  
• 4 Digital Input/Output
  
• 2 Analog Input (can be used as digital I/O)
  
• 1 USB port
  
• 1 Power port (2.1mm Jack)
  
• 2 Potentiometer control
  
• Host LCD Keypad with
  • 6 push buttons.
    
  • 16x2 LCD screen