Flash RPICT Attiny84 with Arduino UNO
This will guide through the steps to flash the firmware on the attiny84 microcontroller found on some RPICT series.
Required equipment
- 1 Arduino UNO
- 6 Jumper wires
Connections
Connect the wires between the Arduino UNO and the RPICT board as follow:
Arduino RPICT
10 Rst
Gnd Gnd
11 MOSI
12 MISO
13 SCK
5V Vcc
| Arduino | RPICT |
|---|---|
| SCT-019-000 | 200 |
| 24 | 83.33 |
| 60 | 39 |
| 50 | 47 |
| 30 | 75 |
| 25 | 91 |
| 20 | 120 |
| 47 | 17.02 |