Flash RPICT Attiny84 with Arduino UNO

From lechacal

Revision as of 19:22, 23 February 2019 by Administrator (talk | contribs) (→‎Connections)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

This will guide through the steps to flash the firmware on the attiny84 microcontroller found on some RPICT series.

Required equipment

1 Arduino UNO
6 Jumper wires

Connections

Connect the wires between the Arduino UNO and the RPICT board as follow:


Arduino	RPICT
10	Rst
Gnd	Gnd
13	SCK
11	MOSI
12	MISO
5V	VCC

Retrieved from ‘http://lechacal.com//wiki/index.php?title=Flash_RPICT_Attiny84_with_Arduino_UNO&oldid=3483’