RPICT4V3 v2.0: Difference between revisions

From lechacal
Jump to navigation Jump to search
No edit summary
(31 intermediate revisions by the same user not shown)
Line 15: Line 15:
* Stackable (up to 5 boards together)
* Stackable (up to 5 boards together)


=Compatibility=
{| class="wikitable" 
|+
|-
!Version
!Compatible?
|-
|Raspberrypi 1 A
|No
|-
|Raspberrypi 1 B+
|Yes
|-
|Raspberrypi 2 B
|Yes
|-
|Raspberrypi 3 B
|Yes
|-
|Raspberrypi 3 B+
|Partially (Contact shop if required) [[RPICT Compatibility with B+ | More info here]].
|-
|}
==Recommended sensors==
==Recommended sensors==
* AC Current sensor: SCT-013-000
* AC Current sensor: SCT-013-000
Line 20: Line 43:
** UK: 77DB-06-09
** UK: 77DB-06-09
** EU: 77DE-06-09
** EU: 77DE-06-09
** US: STA-4190D
** US: 77DA-10-09


[[File:IMG_1239_small.png | 240px]]
[[File:IMG_1239_small.png | 240px]]
Line 43: Line 66:
[[Over Serial Configuration - Sketch 2.4]]<br>
[[Over Serial Configuration - Sketch 2.4]]<br>
[[Over Serial Configuration - Sketch 2.5]]<br>
[[Over Serial Configuration - Sketch 2.5]]<br>
[[Over Serial Configuration - Sketch 2.6]]<br>
[[Over Serial Configuration - Sketch 2.8]]<br>


[[File:Online_config_01.png | 300px| link=http://lechacal.com/RPICT/config/generator/]] Starting from sketch 2.4 the board can be configured with the [http://lechacal.com/RPICT/config/generator/ online configurator].
[[Over Serial Configuration - Sketch 3.0]]<br>
 
[[File:Online_config_01.png | 300px| link=http://lechacal.com/RPICT/config/generator/v2.1/]] The board can be configured with the [http://lechacal.com/RPICT/config/generator/v2.1/ online configurator].
 
 
 
[[File:IMG_1238_small.png | right | 350px]]


==Files==
==Files==


[http://lechacal.com/RPICT/7CT1V/RPICT7V1_v2_0.ino Default Sketch V2.0.]<br>
===Default Sketch===
 
[http://lechacal.com/RPICT/7CT1V/RPICT7V1_v2_5.ino Default Sketch V2.5.]<br>


[http://lechacal.com/RPICT/7CT1V/RPICT7V1_v2_1.ino Default Sketch V2.1.]<br>
[http://lechacal.com/RPICT/7CT1V/RPICT7V1_v2_6_3.ino Default Sketch V2.6.]<br>


[http://lechacal.com/RPICT/7CT1V/RPICT7V1_v2_2.ino Default Sketch V2.2.]<br>
[http://lechacal.com/RPICT/7CT1V/RPICT7V1_v2_7_1.ino Default Sketch V2.7.1.]<br>


[http://lechacal.com/RPICT/7CT1V/RPICT7V1_v2_3.ino Default Sketch V2.3.]<br>
[http://lechacal.com/RPICT/7CT1V/RPICT7V1_v2_8_0.ino Default Sketch V2.8.0.]<br>


[http://lechacal.com/RPICT/7CT1V/RPICT7V1_v2_4.ino Default Sketch V2.4.]<br>
[http://lechacal.com/RPICT/7CT1V/RPICT_MCP3208_v3_0_0.ino Default Sketch V3.0.0.]<br>


[http://lechacal.com/RPICT/7CT1V/RPICT7V1_v2_5.ino Default Sketch V2.5.]<br>
[http://lechacal.com/RPICT/7CT1V/RPICT_MCP3208_v3.0.1.ino Default Sketch V3.0.1.]<br>


<small>(note boards are sold already flashed with latest firmware).</small>
<small>(note boards are sold already flashed with latest firmware).</small>


===noOSC Sketch===
The Default sketch allows up to 28 computation nodes to be run. If more are needed for higher stacks then we recommend to use the noOSC sketch. This is the same as the default sketch but Over Serial Configuration (OSC) as been removed to allow up to 40 nodes to be computed. Configuration has to be edited in the sketch.
[http://lechacal.com/RPICT/7CT1V/RPICT_noOSC_v1_0.ino noOSC Sketch v1.0]<br>
[http://lechacal.com/RPICT/7CT1V/RPICT_noOSC_v1_1.ino noOSC Sketch v1.1]<br>
[[File:IMG_1236_small.png | 350px]]
==Emoncms Config (Emonhub)==
Make you read [[Raspberrypi_Current_and_Temperature_Sensor_Adaptor#Using_Emoncms | this]] first.
For default configuration.
  <nowiki>[[11]]</nowiki>
    nodename = RPICT4V3
    hardware = RPICT4V3
    [[[rx]]]
        names = Vrms1,Vrms2,Vrms3,Realpower1,Realpower2,Realpower3,Realpower4
        datacode = 0
        scales = 1,1,1,1,1,1,1
        units = V,V,V,W,W,W,W


[[File:IMG_1238_small.png]]


[[File:IMG_1236_small.png]]
[[File:Emoncms_channels.png]]


==Related Pages==
==Related Pages==


[[Configure RPICT for EmonCMS]]
[[Howto_setup_Raspbian_for_serial_read]]
 
[[How to calibrate the Voltage Port]]
 
[[Update RPICT firmware (CT7V1/CT4V3/CT8)]]

Revision as of 22:38, 1 March 2019

RPICT4V3 Version 2

Link to shop

This page is for board specific information. More information can be found on the generic page for RPICT series.

  • 8 AC current sensors.
  • Compute real power.
  • Fit on Raspberrypi 4 holes mounting pattern.
  • AtMega328 Mcu (Arduino UNO)
  • MCP3208 ADC
  • Stackable (up to 5 boards together)

Compatibility

Version Compatible?
Raspberrypi 1 A No
Raspberrypi 1 B+ Yes
Raspberrypi 2 B Yes
Raspberrypi 3 B Yes
Raspberrypi 3 B+ Partially (Contact shop if required) More info here.

Recommended sensors

  • AC Current sensor: SCT-013-000
  • AC Voltage sensor:
    • UK: 77DB-06-09
    • EU: 77DE-06-09
    • US: 77DA-10-09

Stacking Configuration

General stacking information is described in the RPICT stacking page.
RPICT_Stacking

Software Configuration

Using a serial line terminal program one can configure the following:

- Polling interval
- Output format (csv or emoncms)
- Calibration values (Voltage and Current)
- Voltage/current combinations for real power computation.
- Output channels

The documentation for serial configuration can be found on this page.
Over Serial Configuration - Sketch 2.2
Over Serial Configuration - Sketch 2.3
Over Serial Configuration - Sketch 2.4
Over Serial Configuration - Sketch 2.5
Over Serial Configuration - Sketch 2.6
Over Serial Configuration - Sketch 2.8

Over Serial Configuration - Sketch 3.0

The board can be configured with the online configurator.


Files

Default Sketch

Default Sketch V2.5.

Default Sketch V2.6.

Default Sketch V2.7.1.

Default Sketch V2.8.0.

Default Sketch V3.0.0.

Default Sketch V3.0.1.

(note boards are sold already flashed with latest firmware).

noOSC Sketch

The Default sketch allows up to 28 computation nodes to be run. If more are needed for higher stacks then we recommend to use the noOSC sketch. This is the same as the default sketch but Over Serial Configuration (OSC) as been removed to allow up to 40 nodes to be computed. Configuration has to be edited in the sketch.

noOSC Sketch v1.0
noOSC Sketch v1.1


Emoncms Config (Emonhub)

Make you read this first.

For default configuration.

 [[11]]
   nodename = RPICT4V3
   hardware = RPICT4V3
   [[[rx]]]
       names = Vrms1,Vrms2,Vrms3,Realpower1,Realpower2,Realpower3,Realpower4
       datacode = 0
       scales = 1,1,1,1,1,1,1
       units = V,V,V,W,W,W,W


Related Pages

Howto_setup_Raspbian_for_serial_read

How to calibrate the Voltage Port

Update RPICT firmware (CT7V1/CT4V3/CT8)