RPICT4V3 v2.0: Difference between revisions
(15 intermediate revisions by the same user not shown) | |||
Line 15: | Line 15: | ||
* Stackable (up to 5 boards together) | * Stackable (up to 5 boards together) | ||
=Compatibility= | |||
{| class="wikitable" | |||
|+ | |||
|- | |||
!Version | |||
!Compatible? | |||
|- | |||
|Raspberrypi 1 A | |||
|No | |||
|- | |||
|Raspberrypi 1 B+ | |||
|Yes | |||
|- | |||
|Raspberrypi 2 B | |||
|Yes | |||
|- | |||
|Raspberrypi 3 B | |||
|Yes | |||
|- | |||
|Raspberrypi 3 B+ | |||
|Partially (Contact shop if required) [[RPICT Compatibility with B+ | More info here]]. | |||
|- | |||
|} | |||
==Recommended sensors== | ==Recommended sensors== | ||
* AC Current sensor: SCT-013-000 | * AC Current sensor: SCT-013-000 | ||
Line 20: | Line 43: | ||
** UK: 77DB-06-09 | ** UK: 77DB-06-09 | ||
** EU: 77DE-06-09 | ** EU: 77DE-06-09 | ||
** US: | ** US: 77DA-10-09 | ||
[[File:IMG_1239_small.png | 240px]] | [[File:IMG_1239_small.png | 240px]] | ||
Line 44: | Line 67: | ||
[[Over Serial Configuration - Sketch 2.5]]<br> | [[Over Serial Configuration - Sketch 2.5]]<br> | ||
[[Over Serial Configuration - Sketch 2.6]]<br> | [[Over Serial Configuration - Sketch 2.6]]<br> | ||
[[Over Serial Configuration - Sketch 2.8]]<br> | |||
[[Over Serial Configuration - Sketch 3.0]]<br> | |||
[[File:Online_config_01.png | 300px| link=http://lechacal.com/RPICT/config/generator/v2.1/]] The board can be configured with the [http://lechacal.com/RPICT/config/generator/v2.1/ online configurator]. | |||
Line 59: | Line 86: | ||
[http://lechacal.com/RPICT/7CT1V/RPICT7V1_v2_7_1.ino Default Sketch V2.7.1.]<br> | [http://lechacal.com/RPICT/7CT1V/RPICT7V1_v2_7_1.ino Default Sketch V2.7.1.]<br> | ||
[http://lechacal.com/RPICT/7CT1V/RPICT7V1_v2_8_0.ino Default Sketch V2.8.0.]<br> | |||
[http://lechacal.com/RPICT/7CT1V/RPICT_MCP3208_v3_0_0.ino Default Sketch V3.0.0.]<br> | |||
[http://lechacal.com/RPICT/7CT1V/RPICT_MCP3208_v3.0.1.ino Default Sketch V3.0.1.]<br> | |||
<small>(note boards are sold already flashed with latest firmware).</small> | <small>(note boards are sold already flashed with latest firmware).</small> | ||
Line 66: | Line 99: | ||
[http://lechacal.com/RPICT/7CT1V/RPICT_noOSC_v1_0.ino noOSC Sketch v1.0]<br> | [http://lechacal.com/RPICT/7CT1V/RPICT_noOSC_v1_0.ino noOSC Sketch v1.0]<br> | ||
[http://lechacal.com/RPICT/7CT1V/RPICT_noOSC_v1_1.ino noOSC Sketch v1.1]<br> | |||
Line 72: | Line 106: | ||
==Emoncms Config (Emonhub)== | ==Emoncms Config (Emonhub)== | ||
Make you read [[Raspberrypi_Current_and_Temperature_Sensor_Adaptor#Using_Emoncms this]] first. | Make you read [[Raspberrypi_Current_and_Temperature_Sensor_Adaptor#Using_Emoncms | this]] first. | ||
For default configuration. | For default configuration. | ||
Line 89: | Line 123: | ||
==Related Pages== | ==Related Pages== | ||
[[Howto_setup_Raspbian_for_serial_read]] | [[Howto_setup_Raspbian_for_serial_read]] |
Revision as of 22:38, 1 March 2019
RPICT4V3 Version 2
This page is for board specific information. More information can be found on the generic page for RPICT series.
- 8 AC current sensors.
- Compute real power.
- Fit on Raspberrypi 4 holes mounting pattern.
- AtMega328 Mcu (Arduino UNO)
- MCP3208 ADC
- Stackable (up to 5 boards together)
Compatibility
Version | Compatible? |
---|---|
Raspberrypi 1 A | No |
Raspberrypi 1 B+ | Yes |
Raspberrypi 2 B | Yes |
Raspberrypi 3 B | Yes |
Raspberrypi 3 B+ | Partially (Contact shop if required) More info here. |
Recommended sensors
- AC Current sensor: SCT-013-000
- AC Voltage sensor:
- UK: 77DB-06-09
- EU: 77DE-06-09
- US: 77DA-10-09
Stacking Configuration
General stacking information is described in the RPICT stacking page.
RPICT_Stacking
Software Configuration
Using a serial line terminal program one can configure the following:
- Polling interval - Output format (csv or emoncms) - Calibration values (Voltage and Current) - Voltage/current combinations for real power computation. - Output channels
The documentation for serial configuration can be found on this page.
Over Serial Configuration - Sketch 2.2
Over Serial Configuration - Sketch 2.3
Over Serial Configuration - Sketch 2.4
Over Serial Configuration - Sketch 2.5
Over Serial Configuration - Sketch 2.6
Over Serial Configuration - Sketch 2.8
Over Serial Configuration - Sketch 3.0
The board can be configured with the online configurator.
Files
Default Sketch
(note boards are sold already flashed with latest firmware).
noOSC Sketch
The Default sketch allows up to 28 computation nodes to be run. If more are needed for higher stacks then we recommend to use the noOSC sketch. This is the same as the default sketch but Over Serial Configuration (OSC) as been removed to allow up to 40 nodes to be computed. Configuration has to be edited in the sketch.
noOSC Sketch v1.0
noOSC Sketch v1.1
Emoncms Config (Emonhub)
Make you read this first.
For default configuration.
[[11]] nodename = RPICT4V3 hardware = RPICT4V3 [[[rx]]] names = Vrms1,Vrms2,Vrms3,Realpower1,Realpower2,Realpower3,Realpower4 datacode = 0 scales = 1,1,1,1,1,1,1 units = V,V,V,W,W,W,W
Related Pages
Howto_setup_Raspbian_for_serial_read