RPIZCT4V3T1: Difference between revisions

From lechacal
Jump to navigation Jump to search
(18 intermediate revisions by the same user not shown)
Line 3: Line 3:
[[File:IMG_1305_small.png | right | 500px]]
[[File:IMG_1305_small.png | right | 500px]]


=Overview=
The RPIZCT4V3T1 is a great all round and self contained unit. It can be configured to read both single phase and 3 phase systems.
Several temperature sensors can be interfaces. It is made to host a user provided Raspberrypi zero.
Future enhancement will feature mezzanine stack for additional sensor capacity.
An enclosure solution is proposed using aluminium extruded case.
=Specifications=
==cpu==
* Hosts RaspberryPi Zero
* Hosts RaspberryPi Zero
* ATmega328 mcu (Arduino UNO)
==Sensors==
* 4 CT sensors
* 4 CT sensors
* 3 AC Voltage
* 3 AC Voltage
* 1 DS18B20 port (temperature)
* 1 DS18B20 port (temperature)
* ATmega328 mcu (Arduino UNO)
==Power==
* Powered from Raspberrypi (microusb)
==Other==
* Fits in Aluminium Enclosure from Evatron
* Fits in Aluminium Enclosure from Evatron
* Option to stack mezzanine board for additional sensors.
* Option to stack mezzanine board for additional sensors.


 
=Recommended sensors=
==Recommended sensors==
* AC Current sensor: SCT-013-000
* AC Current sensor: SCT-013-000
* AC Voltage sensor:  
* AC Voltage sensor:  
** UK: 77DB-06-09
** UK: 77DB-06-09
** EU: 77DE-06-09
** EU: 77DE-06-09
** US: STA-4190D
** US: 77DA-10-09
* Temperature: DS18B20  
* Temperature: DS18B20
 
=Temperature Sensor=
 
The temperature port supports mutiple sensor on the same Onewire line.
 
The sketch is programmed to search for all connected probe at bootup and output all their values when polled. If a new probe is connected the arduino mcu should be restarted for the new probe to be registered.
 
Multiple probes should connected as shown below.


==Temperature Sensor==
[[File:Ds18b20_daisychain.png | 400px]]


The temperature port supports mutiple sensor on the same Onewire line. The current sketch will search for all connected probe at startup and output all their velues when polled.
=Files=


==Files==
==Arduino Sketch==


[http://lechacal.com/RPICT/7CT1V/RPICT7V1_v2_6.ino Default Sketch V2.6.]. No support for multiple temperature.<br>
[http://lechacal.com/RPICT/ZCT4V3T1/RPICTZ_v1_0_0.ino Default RPICTZ Sketch V1.0.0].  


[http://lechacal.com/RPICT/ZCT4V3T1/RPICTZ_v1_0_0.ino Default RPICTZ Sketch V1.0.0]. Supports multiple temperature.<br>
[http://lechacal.com/RPICT/ZCT4V3T1/RPICTZ_v1_1_0.ino Default RPICTZ Sketch V1.1.0].  


<small>(note boards are sold already flashed with latest firmware).</small>
<small>(note boards are sold already flashed with latest firmware).</small>


==Software Configuration==
=Software Configuration=


The documentation for serial configuration can be found on this page. <br>
The documentation for serial configuration can be found on this page. <br>
[[Over Serial Configuration - Sketch 2.6]]<br>
[[Over Serial Configuration - Sketch 2.6 | Over Serial Configuration - Sketch 1.0]]<br>
 
[[Over Serial Configuration - Sketch 2.8 | Over Serial Configuration - Sketch 1.1]]<br>
<!--
[[File:Online_config_01.png | 300px| link=http://lechacal.com/RPICT/config/generator/]] The board can be configured with the [http://lechacal.com/RPICT/config/generator/ online configurator]. Use RPICT4V3 as board type.
[[File:Online_config_01.png | 300px| link=http://lechacal.com/RPICT/config/generator/]] The board can be configured with the [http://lechacal.com/RPICT/config/generator/ online configurator]. Use RPICT4V3 as board type.
-->
There is no online configurator available for this product yet. Do not hesitate to notify your interest to us if you need it.


The default configuration can be obtained using the command
The default configuration can be obtained using the command<br>
<small>version 1.0:</small>
  wget lechacal.com/RPICT/config/C0/rpizct4v3t1.conf
  wget lechacal.com/RPICT/config/C0/rpizct4v3t1.conf
<small>version 1.1:</small>
wget lechacal.com/RPICT/config/C1/rpizct4v3t1.conf
=Enclosure=


==Enclosure==
The board has been designed to fit inside an aluminium extruded enclosure. 3D printed end plates are provided.
Enclosure kit is available in [http://lechacalshop.com/gb/internetofthing/40-enclosure-kit-for-rpizct4v3t1.html the shop].


[[File:IMG_1306_small.png | 400px]]
[[File:IMG_1306_small.png | 400px]]


==Related Pages==
=Related Pages=


[[Use Emonhub with RPICT]]
[[Use Emonhub with RPICT]]


[[Howto setup rpi3 for CSV reading]]
[[Howto_setup_Raspbian_for_serial_read]]


[[How to calibrate the Voltage Port]]
[[How to calibrate the Voltage Port]]

Revision as of 16:07, 3 January 2019



Overview

The RPIZCT4V3T1 is a great all round and self contained unit. It can be configured to read both single phase and 3 phase systems.

Several temperature sensors can be interfaces. It is made to host a user provided Raspberrypi zero.

Future enhancement will feature mezzanine stack for additional sensor capacity.

An enclosure solution is proposed using aluminium extruded case.

Specifications

cpu

  • Hosts RaspberryPi Zero
  • ATmega328 mcu (Arduino UNO)

Sensors

  • 4 CT sensors
  • 3 AC Voltage
  • 1 DS18B20 port (temperature)

Power

  • Powered from Raspberrypi (microusb)

Other

  • Fits in Aluminium Enclosure from Evatron
  • Option to stack mezzanine board for additional sensors.

Recommended sensors

  • AC Current sensor: SCT-013-000
  • AC Voltage sensor:
    • UK: 77DB-06-09
    • EU: 77DE-06-09
    • US: 77DA-10-09
  • Temperature: DS18B20

Temperature Sensor

The temperature port supports mutiple sensor on the same Onewire line.

The sketch is programmed to search for all connected probe at bootup and output all their values when polled. If a new probe is connected the arduino mcu should be restarted for the new probe to be registered.

Multiple probes should connected as shown below.

Files

Arduino Sketch

Default RPICTZ Sketch V1.0.0.

Default RPICTZ Sketch V1.1.0.

(note boards are sold already flashed with latest firmware).

Software Configuration

The documentation for serial configuration can be found on this page.
Over Serial Configuration - Sketch 1.0
Over Serial Configuration - Sketch 1.1
There is no online configurator available for this product yet. Do not hesitate to notify your interest to us if you need it.

The default configuration can be obtained using the command
version 1.0:

wget lechacal.com/RPICT/config/C0/rpizct4v3t1.conf

version 1.1:

wget lechacal.com/RPICT/config/C1/rpizct4v3t1.conf

Enclosure

The board has been designed to fit inside an aluminium extruded enclosure. 3D printed end plates are provided. Enclosure kit is available in the shop.

Related Pages

Use Emonhub with RPICT

Howto_setup_Raspbian_for_serial_read

How to calibrate the Voltage Port