EmonWRT3 Network Locked Out: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 7: | Line 7: | ||
The proposed procedure is to connect to the Emonwrt3 using serial (USB). Then reflash the operating system and re-install EMonwrt3 software. | The proposed procedure is to connect to the Emonwrt3 using serial (USB). Then reflash the operating system and re-install EMonwrt3 software. | ||
[[File:Ftdi-usb-to-ttl-serial-converter-adapter-ft232rl.jpg | right | 300px]] | |||
=Hardware required= | =Hardware required= | ||
A [http://lechacalshop.com/gb/various/36-ftdi-usb-to-ttl-serial-converter-adapter-ft232rl.html USB to UART adaptor] is required. | A [http://lechacalshop.com/gb/various/36-ftdi-usb-to-ttl-serial-converter-adapter-ft232rl.html USB to UART adaptor] is required. | ||
Revision as of 12:00, 5 February 2019
Overview
This page will help you restoring the EmonWRT3 system if the device can not connect to any network after misconfiguration.
The proposed procedure is to connect to the Emonwrt3 using serial (USB). Then reflash the operating system and re-install EMonwrt3 software.
Hardware required
A USB to UART adaptor is required.