RPICT4V3 v2.0: Difference between revisions
Jump to navigation
Jump to search
(→Files) |
|||
| Line 71: | Line 71: | ||
==Related Pages== | ==Related Pages== | ||
[[ | [[Use Emonhub with RPICT]] | ||
[[Howto setup rpi3 for CSV reading]] | [[Howto setup rpi3 for CSV reading]] | ||
[[How to calibrate the Voltage Port]] | [[How to calibrate the Voltage Port]] | ||
Revision as of 14:59, 22 February 2018
RPICT4V3 Version 2
This page is for board specific information. More information can be found on the generic page for RPICT series.
- 8 AC current sensors.
- Compute real power.
- Fit on Raspberrypi 4 holes mounting pattern.
- AtMega328 Mcu (Arduino UNO)
- MCP3208 ADC
- Stackable (up to 5 boards together)
Recommended sensors
- AC Current sensor: SCT-013-000
- AC Voltage sensor:
- UK: 77DB-06-09
- EU: 77DE-06-09
- US: STA-4190D
Stacking Configuration
General stacking information is described in the RPICT stacking page.
RPICT_Stacking
Software Configuration
Using a serial line terminal program one can configure the following:
- Polling interval - Output format (csv or emoncms) - Calibration values (Voltage and Current) - Voltage/current combinations for real power computation. - Output channels
The documentation for serial configuration can be found on this page.
Over Serial Configuration - Sketch 2.2
Over Serial Configuration - Sketch 2.3
Over Serial Configuration - Sketch 2.4
Over Serial Configuration - Sketch 2.5
Starting from sketch 2.4 the board can be configured with the online configurator.
Files
(note boards are sold already flashed with latest firmware).
