EmonWRT3 Network Locked Out

From lechacal

Revision as of 12:00, 5 February 2019 by Administrator (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Overview

This page will help you restoring the EmonWRT3 system if the device can not connect to any network after misconfiguration.

The proposed procedure is to connect to the Emonwrt3 using serial (USB). Then reflash the operating system and re-install EMonwrt3 software.

Hardware required

A USB to UART adaptor is required.

Retrieved from ‘http://lechacal.com//wiki/index.php?title=EmonWRT3_Network_Locked_Out&oldid=3200’