Emonwrt3 Network Configuration: Difference between revisions

From lechacal
Jump to navigation Jump to search
 
(17 intermediate revisions by the same user not shown)
Line 1: Line 1:


PAGE UNDER CONSTRUCTION.
 


=Default=
=Default=
By default the unit serves an access point with SSID set as '''Emonwrt3'''.
By default the unit serves an access point with SSID set as '''Emonwrt3'''.
The IP address is 192.168.2.1 the hostname is '''OpenWrt'''.
The IP address is 192.168.2.1 the hostname is '''OpenWrt'''.
Any device connected to the Emonwrt3 will be assigned an IP address with DHCP.
 
Any device connected to the Emonwrt3 (wifi or wired) will be assigned an IP address with DHCP.


=Connect to wifi AP=
=Connect to wifi AP=


'''Network''' | '''Wifi''' | '''Scan'''
This is to connect the Emonwrt3 to an existing wifi office/home router.
 
From the web interface go to '''Network''' | '''Wifi''' | '''Scan'''. The list of neighbouring network will be displayed. Select your network and follow the step presented on the page.
 
This action will create a new network interface for the wifi. The wired ethernet will still be present with static IP address.
 
At this stage the unit will be able to transmit all streams to their servers. However the web interface will not be accessible over wifi but over wired ethernet only. To enable the web interface over wifi go to '''Network''' | '''Interfaces''' | (WWAN) '''Edit'''. Go to '''Firewall Settings''' tab. Select '''unspecified -or- create:''' and enter '''wifi''' here.<br>
Click [[File:save_n_apply.png]].<br>
Reboot the device.


=Connect to wired DHCP network=
=Connect to wired DHCP network=


Make sure the device can be accesses via wifi first.
This is to connect the unit to a wired ethernet router.
 
Because there is a danger to lock yourself out of the device we highly recommend to connect the device to a wifi network first as described above.
Make sure you can access the web interface from the wifi.


Set unit as auto ip address.
Go to '''Network''' | '''Interface''' | (LAN) '''Edit'''. Change the protocol from '''Static address''' to '''DHCP Client'''. Hit '''Switch Protocol'''. <br>
Click [[File:save_n_apply.png]].<br>


=Mesh=
=Mesh=


Coming soon.
View our guide to configure [[Mesh networking on OpenWRT 15.05 with OLSR]].

Latest revision as of 08:00, 26 July 2018


Default

By default the unit serves an access point with SSID set as Emonwrt3.

The IP address is 192.168.2.1 the hostname is OpenWrt.

Any device connected to the Emonwrt3 (wifi or wired) will be assigned an IP address with DHCP.

Connect to wifi AP

This is to connect the Emonwrt3 to an existing wifi office/home router.

From the web interface go to Network | Wifi | Scan. The list of neighbouring network will be displayed. Select your network and follow the step presented on the page.

This action will create a new network interface for the wifi. The wired ethernet will still be present with static IP address.

At this stage the unit will be able to transmit all streams to their servers. However the web interface will not be accessible over wifi but over wired ethernet only. To enable the web interface over wifi go to Network | Interfaces | (WWAN) Edit. Go to Firewall Settings tab. Select unspecified -or- create: and enter wifi here.
Click .
Reboot the device.

Connect to wired DHCP network

This is to connect the unit to a wired ethernet router.

Because there is a danger to lock yourself out of the device we highly recommend to connect the device to a wifi network first as described above. Make sure you can access the web interface from the wifi.

Go to Network | Interface | (LAN) Edit. Change the protocol from Static address to DHCP Client. Hit Switch Protocol.
Click .

Mesh

View our guide to configure Mesh networking on OpenWRT 15.05 with OLSR.