SKW71: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 24: | Line 24: | ||
* pins 1 and 29 must be connected together for the board to power up. | * pins 1 and 29 must be connected together for the board to power up. | ||
* Using OpenWRT Lan and Wan port are swapped. | * Using OpenWRT Lan and Wan port are swapped. | ||
==Eagle Library== | |||
==Files== | ==Files== | ||
[http://lechacal.com/vrac/skw71.pdf Datasheet] | [http://lechacal.com/vrac/skw71.pdf Datasheet] | ||
Revision as of 12:31, 18 March 2018
Skylab SKW71
Embedded module with wifi and ar9331 controller from Skylab.
Available readily flashed with OpenWRT in the shop. Link to shop
Breakout Board
Pin assignment
This table above has been established according to the manufacturer documentations. However it has been noted the following:
- pins 1 and 29 must be connected together for the board to power up.
- Using OpenWRT Lan and Wan port are swapped.