New pages
Jump to navigation
Jump to search
- 09:10, 18 November 2023 True Joule Thief (hist | edit) [1,262 bytes] Administrator (talk | contribs) (Created page with " File:Scope results joule thief.png")
- 19:30, 10 November 2023 RPICT Minimum Output Rate (hist | edit) [4,433 bytes] Administrator (talk | contribs) (Created page with " =Why is there a minimum output rate?= The micro-controller performs task once after the other. It must complete the sampling of all configured channels before sending another serial output out. The example below show the task scheduling where 3 channels are computed. The output rate must be larger than the time it takes to sample all channels. File:Screenshot 2023-11-10 19-26-36.png")
- 20:06, 10 October 2023 RPICT3V1 Sketch version 1.3 documentation (hist | edit) [4,292 bytes] Administrator (talk | contribs) (Created page with "This is the archived documentation for firmware 1.3 of the RPICT3V1. Make sure to check your firmware version using the command lcl-show-header.py ==Default Data Output== Using the default sketch '''version 1.3''' and below the output is <br> NodeID Realpower1 Realpower2 Realpower3 Irms1 Irms2 Irms3 Vrms * RealPower in Watts * Irms in MilliAmps * Vrms in Volts ==Restore Default Config== You should have received a key when acquiring the unit. Use this key to down...")
- 13:07, 9 October 2023 ZMPT101B Module 3x v4 (hist | edit) [1,483 bytes] Administrator (talk | contribs) (Created page with " [http://lechacalshop.com/gb/internetofthing/75-zmpt101b-voltage-sensor.html Link to the shop]. ZMPT101B Module converts AC Voltage to lower AC Voltage suitable for connection with our RPICT units. This module shows greatly improved linearity features. 300px | right ===Compatible boards=== Any RPICT unit with a voltage input can support ZMPT module provided the unit has been specifically purchased with ZMPT support. Make sur this is order...")
- 20:53, 13 September 2023 Standalone Arduino Programmer (hist | edit) [3,692 bytes] Administrator (talk | contribs) (Created page with " File: Screenshot_2023-09-13_21-52-42.png")