ZMPT101B Module 3x v4: Difference between revisions

From lechacal
Jump to navigation Jump to search
No edit summary
 
Line 11: Line 11:
The ZMPT_3X is specifically designed for 3 phase application.
The ZMPT_3X is specifically designed for 3 phase application.


Any RPICT unit with a voltage input can support ZMPT module provided the unit has been specifically purchased with ZMPT support. Make sur this is ordered right when placing the order in the shop.
Any RPICT unit with a voltage input can support ZMPT module provided the unit has been specifically purchased with ZMPT support. Make sure this is ordered right when placing the order in the shop.


* [[RPICT4V3 Version 5]]
* [[RPICT4V3 Version 5]]

Latest revision as of 13:19, 9 October 2023

http://lechacalshop.com/gb/internetofthing/75-zmpt101b-voltage-sensor.html Link to the shop

ZMPT101B Module converts AC Voltage to lower AC Voltage suitable for connection with our RPICT units.

This module shows greatly improved linearity features.

Compatible boards

The ZMPT_3X is specifically designed for 3 phase application.

Any RPICT unit with a voltage input can support ZMPT module provided the unit has been specifically purchased with ZMPT support. Make sure this is ordered right when placing the order in the shop.

Connections

  • Input AC has terminal connector

  • Output AC has Jack power type for direct connection to RPICT with a Power Jack cable.

Mechanical

  • Dimensions: 45x30mm height 23mm.
  • 2 Holes each side 25mm apart for Din Rail mounting.

Technical Spec

Name Input Resistor Output Resistor (Ω) Sensitivity Range (rms) Comment
ZMPT_1X_225 160 kΩ 100 Ω 0.625 mV/V 0 to 225V Used to cover both 110 and 220V.
ZMPT_1X_140 100 kΩ 100 Ω 1 mV/V 0 to 140V For 110/120V use.
ZMPT_1X_280 200 kΩ 100 Ω 0.5 mV/V 0 to 280V For 220/240V use.
ZMPT_1X_420 300 kΩ 100 Ω 0.25 mV/V 0 to 420V