View source for Transform a RPICT into a web scope

THIS GUIDE IN INCOMPLETE. COMING SOON...

=Overview=

We will use the Raspberrypi to collect the ananlog data from the RPICT and serve them as a HTTP server.

This is to demonstrate how a RPICT can be used to display the waveform. 

'''IMPORTANT'''. This is not a substitute for a scope. This is just a playground for demonstration. 

[[File:RPICT_SCOPE_EXAMPLE_001.png | 700px]]

=Preliminaries=

Make sure you have a fresh Raspbian image installed.

Setup the Raspbian to enable the serial port. See the guide below to complete this.<br>
[[Howto setup Raspbian for serial read]]

=Setup the web server=

Install lighthttp to configure the Raspberrypi as a web server.

 sudo apt-get install lighttpd
 sudo wget lechacal.com/repo/emonwrt3/lighttpd.conf -O /etc/lighttpd/lighttpd.conf
 sudo /etc/init.d/lighttpd restart

WHAT FOLLOWS IS COMING SOON...