Emonwrt3 Upgrade Software: Difference between revisions
Jump to navigation
Jump to search
(Created page with " =1. Preliminaries= Connect to the device using ssh. Install [http://the.earth.li/~sgtatham/putty/latest/x86/putty.exe Putty] on your computer for this and setup a ssh connect...") |
|||
| (2 intermediate revisions by the same user not shown) | |||
| Line 14: | Line 14: | ||
=3. Install new packages= | =3. Install new packages= | ||
opkg install | opkg install emonwrt3 emonwrt3-luci | ||
=4. Replace the config= | =4. Replace the config= | ||
cp /etc/config/ | |||
This step might be optional. By default your old config will be preserved. If upgrading to a major version (i.e. from 1.0.0 to 1.1.0) the configuration might have to be reset as shown below. | |||
cp /etc/config/emonwrt3-opkg /etc/config/emonwrt3 | |||
=5. Reboot the device= | =5. Reboot the device= | ||
Latest revision as of 19:19, 13 July 2018
1. Preliminaries
Connect to the device using ssh. Install Putty on your computer for this and setup a ssh connection.
User: root password: admin (or anything you have already setup).
Note that you will need to reconfigure the unit from scratch.
2. Remove old packages
In the ssh session issue these commands below:
opkg update opkg remove emonwrt3 emonwrt3-luci
3. Install new packages
opkg install emonwrt3 emonwrt3-luci
4. Replace the config
This step might be optional. By default your old config will be preserved. If upgrading to a major version (i.e. from 1.0.0 to 1.1.0) the configuration might have to be reset as shown below.
cp /etc/config/emonwrt3-opkg /etc/config/emonwrt3