First Use: Difference between revisions
Jump to navigation
Jump to search
| Line 7: | Line 7: | ||
* Connect a network cable from the base unit directly to a computer. | * Connect a network cable from the base unit directly to a computer. | ||
* On the computer open a web browser (chrome/firefox/safari or else). | * On the computer open a web browser (chrome/firefox/safari or else). | ||
* Go to address [http://192.168.2.1] | * Go to address [http://192.168.2.1 http://192.168.2.1] | ||
* The Luci web interface should now appear. | * The Luci web interface should now appear. | ||
Revision as of 19:02, 9 June 2018
First time setup is really straight forward.
Acccessing the web interface
- Insert the SKW71 module on the base unit. Manipulate gently as these are small parts.
- Connect a network cable from the base unit directly to a computer.
- On the computer open a web browser (chrome/firefox/safari or else).
- Go to address http://192.168.2.1
- The Luci web interface should now appear.
Visualise Data
- From the top menu select Emonwrt3 | Streams
- The first Emoncms entry will be enabled but not configured.
- Get the write/read apikey from your emoncms online account.
- Copy and paste it in the apikey field of the first stream entry on Luci.
- Save and apply. After few seconds data will appear on teh Emoncms online account under Setup | Inputs.