Upload Arduino sketch from Raspberrypi to RPICT: Difference between revisions

Revision as of 15:57, 21 April 2021

This article will guide you to upload an Arduino sketch form teh raspberrypi directly to the RPICT units.

This only works with RPICT units having an atmega328p chip and with autoreset support.

Suitable units are any RPICT version 5.

This won't work with any RPICT unit version 3 and RPICT3V1/RPICT3T1.

The atmega328p chip must have bootloader enabled. If not then the bootloader should be burnt with the NanoProg first.

First of all install avrdude.

sudo apt-get install avrdude

Get the package from our server.

wget lechacal.com/lcl-upload-sketch.zip

deflate the file.

unzip lcl-upload-sketch.zip

get inside.

cd lcl-upload-sketch

run the installation script.

./install.sh

Credits go to the SpellFoundry on Github who has well inspired this.

Revision as of 15:57, 21 April 2021 (view source) Administrator (talk \| contribs) No edit summary ← Older edit		Revision as of 15:57, 21 April 2021 (view source) Administrator (talk \| contribs) (→‎Credits) Newer edit →
Line 40:		Line 40:
	==Credits==		==Credits==

	Credits ~~goes~~ to the [https://github.com/SpellFoundry/avrdude-rpi SpellFoundry on Github] who has well inspired this.		Credits go to the [https://github.com/SpellFoundry/avrdude-rpi SpellFoundry on Github] who has well inspired this.