Emonwrt3 Network Configuration: Difference between revisions
Jump to navigation
Jump to search
(Created page with " PAGE UNDER CONSTRUCTION. =Default= Wifi off. Static ip 192.168.2.1 on wired. =Connect to wifi AP= '''Network''' | '''Wifi''' | '''Scan''' =Connect to wired DHCP network= ...") |
|||
| Line 3: | Line 3: | ||
=Default= | =Default= | ||
By default the unit serves an access point with SSID set as '''Emonwrt3'''. | |||
The IP address is 192.168.2.1 the hostname is '''OpenWrt'''. | |||
Any device connected to the Emonwrt3 will be assigned an IP address with DHCP. | |||
=Connect to wifi AP= | =Connect to wifi AP= | ||
Revision as of 22:10, 22 June 2018
PAGE UNDER CONSTRUCTION.
Default
By default the unit serves an access point with SSID set as Emonwrt3. The IP address is 192.168.2.1 the hostname is OpenWrt. Any device connected to the Emonwrt3 will be assigned an IP address with DHCP.
Connect to wifi AP
Network | Wifi | Scan
Connect to wired DHCP network
Make sure the device can be accesses via wifi first.
Set unit as auto ip address.
Mesh
Coming soon.