MCP3208 Tester: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 4: | Line 4: | ||
All pins are available to pick with jumper wires using two 8 pins socket header. | All pins are available to pick with jumper wires using two 8 pins socket header. | ||
A 6 pins SPI port is available for direct connection with other systems. We recommend our NanoProg to connect an arduino Nano to the tester. | A 6 pins SPI port is available for direct connection with other systems. We recommend our [[NanoProg_v1 | NanoProg]] to connect an arduino Nano to the tester. | ||
On teh analog input side | |||
Revision as of 11:45, 1 May 2020
This is a MCP3208 tester board. It comes with a SOP16 socket.
All pins are available to pick with jumper wires using two 8 pins socket header.
A 6 pins SPI port is available for direct connection with other systems. We recommend our NanoProg to connect an arduino Nano to the tester.
On teh analog input side
