Upload Arduino sketch from Raspberrypi to RPICT: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 10: | Line 10: | ||
This won't work with any RPICT unit version 3 and RPICT3V1/RPICT3T1. | This won't work with any RPICT unit version 3 and RPICT3V1/RPICT3T1. | ||
The atmega328p chip must have bootloader enabled. If not then the bootloader should be | The atmega328p chip must have bootloader enabled. If not then the bootloader should be burnt with the [[NanoProg_v1 | NanoProg]] first. | ||
==Installation== | |||
First of all install avrdude. | |||
sudo apt-get install avrdude | |||
Get the package from our server. | |||
wget lechacal.com/lcl-upload-sketch.zip | |||
deflate the file. | |||
unzip lcl-upload-sketch.zip | |||
get inside. | |||
cd lcl-upload-sketch | |||
run the installation script. | |||
./install.sh | |||
Revision as of 15:48, 21 April 2021
This article will guide you to upload an Arduino sketch form teh raspberrypi directly to the RPICT units.
Prerequisite
This only works with RPICT units having an atmega328p chip and with autoreset support.
Suitable units are any RPICT version 5.
This won't work with any RPICT unit version 3 and RPICT3V1/RPICT3T1.
The atmega328p chip must have bootloader enabled. If not then the bootloader should be burnt with the NanoProg first.
Installation
First of all install avrdude.
sudo apt-get install avrdude
Get the package from our server.
wget lechacal.com/lcl-upload-sketch.zip
deflate the file.
unzip lcl-upload-sketch.zip
get inside.
cd lcl-upload-sketch
run the installation script.
./install.sh