RPICT QC Tools: Difference between revisions
Jump to navigation
Jump to search
(Created page with " =Preliminairies= The guide below must have been followed first. Upload_Arduino_sketch_from_Raspberrypi_to_RPICT =Installation= Download the package wget lechacal.com/...") |
No edit summary |
||
| Line 3: | Line 3: | ||
The guide below must have been followed first. | The guide below must have been followed first. | ||
[[Upload_Arduino_sketch_from_Raspberrypi_to_RPICT]] | [[Upload_Arduino_sketch_from_Raspberrypi_to_RPICT]] | ||
| Line 11: | Line 12: | ||
Unzip it | Unzip it | ||
unzip rpict-qc-tools.zip | unzip rpict-qc-tools.zip | ||
Move | Move inside | ||
cd rpict-qc-tools | cd rpict-qc-tools | ||
For the master board load the firmware below | For the master board load the firmware below | ||
Revision as of 20:43, 18 August 2022
Preliminairies
The guide below must have been followed first.
Upload_Arduino_sketch_from_Raspberrypi_to_RPICT
Installation
Download the package
wget lechacal.com/RPICT/tools/rpi-qc-tools.zip
Unzip it
unzip rpict-qc-tools.zip
Move inside
cd rpict-qc-tools
For the master board load the firmware below
lcl-upload-sketch.sh QC_01.ino.hex
the slave load this one instead
lcl-upload-sketch.sh QC_01_slave1.ino.hex