RPICT QC Tools: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 14: | Line 14: | ||
Move inside | Move inside | ||
cd rpict-qc-tools | cd rpict-qc-tools | ||
To read the master board load the firmware below | |||
lcl-upload-sketch.sh QC_01.ino.hex | lcl-upload-sketch.sh QC_01.ino.hex | ||
for the slave load this one instead | for the slave load this one instead | ||
Revision as of 21:12, 18 August 2022
Preliminairies
The guide below must have been followed first.
Upload_Arduino_sketch_from_Raspberrypi_to_RPICT
Installation
Download the package
wget lechacal.com/RPICT/tools/rpi-qc-tools.zip
Unzip it
unzip rpict-qc-tools.zip
Move inside
cd rpict-qc-tools
To read the master board load the firmware below
lcl-upload-sketch.sh QC_01.ino.hex
for the slave load this one instead
lcl-upload-sketch.sh QC_01_slave1.ino.hex
Run it
./lcl-qc.py